Quattro Environmental, Inc.
Atlas SoilLok™
Atlas DustLok™
Tackifibers™
Cliffhanger Tack™
Growing Soil™
The Quattro Advantage
Product Specifications
Erosion Control Technical Articles
Contact Us
Holding Soil™ Technology
A Complete Family of Technologically Advanced Soil Binders and Tackifiers

Material Safety Data Sheet
Cliffhanger Tack

SECTION I IDENTIFICATION OF PRODUCT

Product Name:

Cliffhanger Tack

Chemical Composition:

Betonite Clay 100%

Chemical Family: Natural mineral, montmorillonite.

U.S. Distributor:

Quattro Environmental, Inc.
649 I Avenue
Coronado, CA 92118
(619)522-0044

SECTION II INGREDIENTS

Cliffhanger Tack is a clay product of naturally occurring hydrated aluminosilicate of sodium, calcium, magnesium and iron.
Crystalline Quartz CAS# 14808-60-7 (naturally occurring contaminant) 2 - 6%

SECTION III PHYSICAL DATA

Physical appearance:

Pale grey to buff powder or granules, odorless

Boiling point:

N/A

Specific gravity (H20 = 1):

2.5

Vapor pressure (mm Hg):

N/A

Melting point:

N/A

Vapor density (Air = 1):

N/A

Solubility in water: Negligible

SECTION IV FIRE AND EXPLOSION HAZARD DATA

Flash point (C) and method:

N/A

Flammable limits:

N/A LEL None UEL None

Extinguishing media:

N/A

Special fire fighting procedures: Inorganic mineral/non-flammable
Unusual fire/explosion hazards: N/A

SECTION V HEALTH HAZARD DATA

Nuisance Dust:

Avoid breathing

Signs/symptoms of exposure:

Excessive inhalation of dust may result in shortness of breath and reduced pulmonary function.

Acute and chronic:

May cause delayed respiratory disease if dust inhaled over a prolonged period of time.

Emergency & First-Aid Procedures:  
Eye Contact: Flush eyes with water
Gross inhalation of dust: Remove to fresh air, give oxygen or artificial respiration if necessary; get medical attention.

SECTION VI REACTIVITY DATA

Stability:

Stable

Incompatibility (materials to avoid):

None known, if used for intended purpose.

Hazardous decomposition or by-products:

None known

Hazardous polymerization: Will not occur

SECTION VII PRECAUTIONS FOR SAFE HANDLING/LEAK PROCEDURES

Steps to be taken if material is released or spilled:

Vacuum if possible to avoid generating airborne dust. Avoid breathing dust. Wear an approved respirator. Avoid adding water, the product will become slippery when wet.

Waste disposal method: Follow federal, state and local regulations for solid waste.

SECTION VIII SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify type): OSHA standard 1910.134 or ANSI Z88.2-1980 specification. Fire fighters should put on breathing apparatus.
Ventilation: Local exhaust None
Hand protection: None
Eye protection Protective goggles
 
Native Plants Alliance

Top of Page

Growing Soil™ : Kiwi Power™ | Fertil-Fibers™

Holding Soil™ : Cliffhanger Tack™ | Tackifibers™
Atlas SoilLok™ | Atlas DustLok™

Product Specs | Quattro Advantage | Technical Articles | Contact Us

Home | Site Map



© 2006 by Quattro Environmental, Inc. All Rights Reserved. Text, graphics, and HTML code are protected by US and International Copyright Laws, and may not be copied, reprinted, published, translated, hosted, or otherwise distributed by any means without explicit permission.

Quattro Environmental, Inc.
649 'I' Avenue - Coronado, CA 92118

(619) 522-0044
(619) 522-0055 fax