Material Safety Data Sheet
Atlas DustLok
Essentially similar to OSHA - 20 Form U.S. Department of Labor.
|
SECTION I IDENTIFICATION OF PRODUCT |
|
|
Product Name: |
Atlas DustLok 51-0103 |
|
U.S. Distributor: |
Quattro Environmental, Inc. |
| Transportation Emergency | Chem-Trec: 800/424-9300 |
|
SECTION II INGREDIENTS |
|
| Name | Polyvinyl acetate dispersion |
| CAS# | Mixture |
| % by weight | 100 |
|
Exposure Limits |
None established |
|
SECTION III PHYSICAL DATA |
|
|
Appearance |
White opaque liquid |
| Odor | Characteristic |
| pH | 4 to 6 |
| Freezing Point | Approx. 0°C (32°F) |
| Specific Gravity | Approx. 1.10 (Water = 1) |
| Vapor Pressure | Not known |
| Vapor Density | Not known |
| Volatility | Same as water. |
| VOC | <0.17% (by weight) |
| Evaporation Rate | Same as water |
| Viscosity | Approx. 3,500 cP@76°F |
| Solubility | See dispersion properties. |
| Dispersion Properties | Disperses in water. |
| Boiling Point | Approx. 100°C (212°F) |
| Water/oil distributor coefficient | N/A |
| Physical Chemical Comments | The physical data presented above are typical values and should not be construed as product specifications. |
|
SECTION IV FIRE AND EXPLOSION HAZARD DATA |
|
| Flammability of the Product | Non-flammable. |
| Auto-ignition Temperature | N/A |
| Flash Points | N/A |
| Flammable Limits | N/A |
|
Fire Fighting Media and Instructions |
Aqueous dispersion is non-flammable. |
|
SECTION V HEALTH HAZARD DATA |
|
|
Non-flammable liquid dispersion. This product does not present significant health hazard when handled using good industrial hygiene and safety practice. May cause mild irritation of eyes, skin or respiratory tract. May cause gastrointestinal irritation if swallowed. |
|
|
Routes of exposure |
Eyes, Skins, Inhalation, Ingestion |
|
Potential Acute Health Effects |
Eyes:may cause mild eye irritation |
|
SECTION VI REACTIVITY DATA |
|
|
Stability and Reactivity |
The product is stable. |
|
Conditions of Instability |
Not known |
|
Incompatibility with Various Substances |
Incompatible with oxidizing agents, strong acids and bases. |
| Hazardous Decomposition | Not known |
|
Hazardous Polymerization |
Will not occur. |
|
SECTION VII FIRST AID MEASURES |
|
|
Eye Contact |
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water. Get medical attention if symptoms persist. |
| Skin Contact | Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. |
| Inhalation | If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
|
Ingestion |
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention. |
| SECTION VIII SPILL OR LEAK PROCEDURES | |
| Spill and Leak | Absorb with an inert non-biodegradable material and place in an appropriate waste disposal container. Discard in accordance with federal, state and local regulations. |
|
SECTION IX SPECIAL PROTECTION INFORMATION |
|
|
Engineering Controls |
Use process enclosures, local exhaust ventilation, Or other engineering controls to prevent exposure To airborne vapors or mists. |
|
Personal Protection |
|
|
Eyes |
Safety glasses with side shields. |
| Body | Wear overalls or long sleeved shirt and long trousers |
| Respiratory | A respirator is not needed if ventilation is sufficient to control vapors or mists. Wear air purifying respirator when ventilation is inadequate. |
| Hands | Gloves, chemical resistant. |
|
Feet |
Safety shoes, chemical resistant. |
|
SECTION X SPECIAL PRECAUTIONS
|
|
| Handling | Avoid breathing vapors or spray mists. Use in well ventilated area. Wash thoroughly after handling. |
|
Storage |
Keep container tightly closed. Protect from freezing. |
|
Other Precautions |
Avoid open flames. |
